From The RadioReference Wiki
- Uniden Bearcat Bc125at Driver For Mac Download
- Uniden Bearcat Bc125at Driver For Mac Drivers
- Uniden Bearcat Bc125at Driver For Mac Windows 7
- Uniden Bearcat Bc125at Driver For Mac Windows 10
Features
Download the serial driver required for your scanner (Save it to your desktop) BC75XLT Driver. BCD325P2 Driver. BCD996P2 Driver. Go to your start menu and search 'Device Manager' Step 3. Connect the Uniden USB Programming cable to your computer and scanner. Note your scanner should be powered on. Herein, how do I setup my Uniden bc125at scanner? Scanner 101 – Programming the Uniden Bearcat BC125AT Scanner. Press Hold Button and Press the channel number you want to program then hit hold again. Press 'Func' (Orange Button) then hit 'Pgm E' button. 'Enter Frequency' will be highlighted press 'Pgm E' button. Check the programming software that you plan on using to make sure is runs on the. Scanner Radio PC Interface FTDI USB Cable for Uniden Bearcat USB-1. 14-day return exchange policy if and only if. Uniden just released firmware 1.48 for the Uniden R1 and the Uniden R3. Listen in and stay informed with the Uniden BC125AT Compact Bearcat® Handheld Scanner. This sophisticated scanner with 500 alpha-tagged channels boasts a convenient compact design and loads of features. Close Call RF capture technology instantly tunes to signals from nearby transmitters and the Do Not Disturb Mode prev.
- 500 Channels, 10 banks
- Frequency Coverage
- 25-54 MHz
- 108-174 MHz
- 225-380 MHz
- 400-512 MHz
- 10 Channel Storage Banks - You can store up to 50 frequencies into each bank for a total of 500 frequencies so you can more easily identify calls.
- Close Call RF Capture Technology - you can set the scanner so it detects and provides information about nearby radio transmissions
- Close Call Do-Not-Disturb - checks for Close Call activity in between channel reception so active channels are not interrupted.
- Close Call Temporary Store - temporarily stores and scans the last 10 Close Call hits in the 'Close Call Hits' system.
- PC Programming - you can download information into the scanner and control the scanner via your personal computer.
- CTCSS and DCS Squelch Modes - rapid search for CTCSS/DCS tones/codes used during a transmission. You can identify up to 50 CTCSS tones and 104 DCS codes.
- Direct Access - lets you directly access any channel.
- Lock-Out Function - lets you set your scanner to skip over specified channels or frequencies when scanning or searching.
- Temporary Lockout - makes it easy to temporarily lock out any channel or frequency. The lockout is cleared when you turn power off, then back on so you don't have to remember to unlock the channels later.
- Triple-Conversion Circuitry - virtually eliminates any interference from IF (intermediate frequency) images, so you hear only the selected frequency.
- Text Tagging - you can name each channel, using up to 16 characters per name.
- Service Banks - frequencies are preset in 10 separate Police, Fire/Emergency, Ham, Marine, Railroad, Civil Air, Military Air, CB Radio, FRS/GMRS/MURS, and Racing banks to make it easy to locate specific types of calls and search any or all of these banks.
- Priority Scan with Do Not Disturb - lets you program one channel in each bank (10 in all) and then have the scanner check each channel every 2 seconds while it scans the banks so you don't miss transmissions on those channels. Do-Not Disturb keeps the scanner from interrupting transmissions during receiving.
- Priority Plus Scan - you can set the scanner so it scans only the priority channels.
- Scan/Search Delay/Resume - controls whether the scanner pauses at the end of the transmission to wait for a reply. You can set the Delay time for each Channel, Close Call Search, Custom Search, and Service search. You can also set a negative delay where the scanner stops on transmissions for a set time then automatically resumes.
- Custom Search - lets you program up to 10 Custom Search Ranges and search any or all of these ranges.
- Quick Search - allows you to enter a frequency and start searching up or down from that frequency.
- Turbo Search - increases the search speed from 100 to 300 steps per second automatically for bands with 5 kHz steps.
- Search Lockouts - you can lock up to 200 search frequencies: 100 temporary frequencies and 100 permanent frequencies in Custom Search, Service Search, Close Call Search, or Quick Search Modes.
- Weather Alert Priority - the scanner scans active WX channels every 5 seconds to check for the presence of a 1050 Hz Weather Alert Tone.
- Weather Alert Standby - the scanner allows you to monitor for weather alerts broadcast on NOAA channels.
- Display Backlight - You can turn on/off the LCD backlight, set it operate on squelch only, keypress only, or both.
- Signal Strength Meter - shows the signal strength for more powerful transmissions.
- Flexible Antenna with BNC Connector - provides adequate reception in strong signal areas and is designed to help prevent antenna breakage. Or, you can connect an external antenna for better reception.
- Memory Backup - keeps the frequencies stored in memory for an extended time if the scanner loses power.
- Two Power Options - let you power the scanner using the included two AA rechargeable or alkaline batteries or the supplied USB cable.
- Built-In Charger - allows you to charge Ni-MH batteries in the scanner using a USB port on any computer and the supplied USB cable.
- Key Confirmation Tones - You can turn on/off a tone that sounds when you perform an operation correctly or if you make an error.
- Key Lock - lets you lock the scanner's keys to help prevent accidental changes to the scanner's programming.
- Battery Save - works when there is no transmission for 1 minute in Scan Hold Mode and any Search Hold Mode (without Priority Scan). This feature turns off RF power for 1 second and turns on it for 300ms to extend the battery life.
- Battery Low Alert - the icon will blink in the display and a tone warns you every 15 seconds when the battery power gets low
Owner's Manual
Firmware Updates
Hidden Menus & Features
- USA Band Plan - '1' + 'Power On'.
- Canada Band Plan - '2' + 'Power On'.
- Reset & Clear Memory - '2' + '9' + 'Hold' + 'Power On'.
- Reset & Clear Memory (same) - '8' + '9' + 'Hold' + 'Power On.'
- Load Test Data - '3' + '9' + 'Power On'. Overwrites channels with 144-146 VHF Amateur frequencies.
- Batt. Save Test - '1' + '7' + 'Power On'. Then 'Hold' to toggle.
- Batt. Charge Test - '2' + '7' + 'Power On. Then 'Hold' to toggle.
- Key Touch Test - '3' + '0' + 'Power On'.
- Display Contrast - '3' + 'Hold' + 'Power On'.
- Contrast & Key Test - '3' + 'Scan' + 'Power On'.
- Others? ...
Related Pages
- External Links
Reviews, etc
- This is a fantastic scanner for its class, similar in design and function to the BC72XLT, BC92XLT and BC95XLT series of scanners, with a vastly improved set of features and narrow-band support. This is your best buy for a non-digital, non-trunking scanner; Made in 2012. Owner for 1+ years.
- Critique: Incorrectly includes common U.S. Business Band itinerant frequencies in the FRS/GMRS/MURS service bank without mention in the manual. (Ch28: 'Red Dot' 151.6250 MHz, Ch29: 'Brown Dot' 464.5000 MHz, Ch30: 'Yellow Dot' 464.5500 MHz, Ch31: 'Silver Star' 467.8500 MHz, Ch32: 'Gold Star' 467.8750 MHz, Ch33: 'Red Star' 467.9000 MHz, Ch34: 'Blue Star' 467.9250 MHz)
- Critique: Adjusting squelch requires several button pushes and knob twists. Adjusting volume requires a button push and knob twist. Wish there were options to configure this. My only real complaint.
Supporting Software
- BC125AT SS (Uniden Programming Software) (freeware)
- Scan125 (Now supports UBC126AT) (freeware)
- ARC125 (costs $24.99)
Note: The BC125AT SS software saves a tab delimited file format that can be edited and managed in most text editors and spreadsheet software. Lines can be safely omitted or reordered.
Mailing Lists / forums
BC125AT Scanners for Sale
Retrieved from 'https://wiki.radioreference.com/index.php?title=BC125AT&oldid=279072'
| Scan125 Control Program |
|---|
| Home PageManualDownloadSend Your CommentsUsage ProfileUser CommentsDONATE |
|---|
Supported Scanners: Uniden UBC125XLT, BC125AT, UBC126AT andAlbrecht AE126H
The Scan125 Control Program is currently Freewarewith a Careware/Charity statusand objective. (http://en.wikipedia.org/wiki/Careware).
Please Donate to mysupported charity which I would very much appreciate, as will they,and will keep me developing and supporting the programs.The Scan125 Control Program Suiteconsists of two programs. Then main Scan125 Control Program and the Scan125Convert Utility Program.
The project started in November 2013 with the first public non betarelease in April 2014. Since then Scan125 has been regularlydeveloped and supported into the product you see today with many of thefeatures and functions being implemented in response to userrequests. Since it's inception and release it has supportedscanning real time control and virtual console/display function.
Up to 25 August 2018 Scan125 had achieved over 3500registered users in 57 countries. Since then and with V2.5.0.0 onwards thefree registration is no longer required. The number ofusers will no doubt continue to grow and is a very welcome endorsementof the program's growth and equally important the feedback andencouragement I have received from so many people. Thank you all!
It would be really great to be world famous and earn millions ofpounds from doing crappy software but it is not going to happen sountil I win the lottery I'll have to be poor and boring.
- Scan125Control Program - the original full control program for realtime controlling (with scanner display) and also the loading, savingand editing of data to/from the following scanners:
- Uniden UBC125XLT -(Nov.2013)
- Uniden BC125AT - (Nov.2013)
- Uniden UBC126AT - (Jun.2015)
- Albrecht AE125H - (Jul.2017)
- Support real time control, with virtual console and display, forALL the above listed Scanners.
- Support setting of many scanner controls with a single mousebutton click - e.g Close Call Settings
- Support virtual bank naming
- Support all these scanners in one package
- Support real time logging and auto saving of scan hits
- Support audio recording with automatic start/stop/pause and spiltfile recording
- Support for many other features not available in other software
- ALL FOR FREE andsupporting Charity if you choose to
- Scan125Convert Utility Program -for reading CSV data files and converting them to Scan125 ControlProgram format data files.
Uniden Bearcat Bc125at Driver For Mac Download
Scan125ConvertUtility Programis currently Freeware.
Both programs work individually of each other and each has their ownversion numbers and release cycles.
Please note that the Scan125 Control Program also requires the separate installation of thenecessary Uniden Serial Driver which is also available on THIS website in the Scan125 Downloadlocation.
ForApple PC/MAC users using BOOTCAMP, PARALLELS or VMware to run Windowsthen by using the latest version the Scan125 Control Program youshould be able to run Scan125 on your system. If not then pleaselet me know.
Note! I check all my software before uploading with MalwarebytesPro and Microsoft Windows Defender Antivirus. In addition I useVirusTotal.com to confirm as they have over 60 scanner engines. Despite these actions you may find that your AntiVirus/Securitysoftware may flag my software. This is because I use a sourceprotection obfuscator which confuses them. Please report to mevia Email any cases where you find any issue with downloading mysoftware. When I receive such reports I downloadmyself and revalidate. I then contact the anti virus softwarevendor with a false positive report. It can take them 48hours or longer to process and update their definitions. Meanwhile you can also use VirusTotal.com for yourself and decide ifyou want to create an exception in your software.
Current Release - V3.3.0.0 - 10 October 2020
The current release version, files and MD5 checksums are as detailed inthe table below:| Version | File | MD5 Checksum | Date |
| V3.3.0.0 | Scan125_V3300.zip | 0D15C23CF278ABFC9CB2B7787AE930C1 | 10 October 2020 |
| V3.3.0.0 | Scan125.exe | 85895C96D317FBC19F6F2C6BD5AD95D8 | 10 October 2020 |
NEW in V3.3.0.0
- Add - Add HTML Frequency Monitoring File (useful for audiostreaming information and website information)
- Add - Error message trap for when scanner returns more statusdata fields then expected (stops hard errors)
- None
- Fix - Notepad data not being written in release V3.2.0.0 only
- Fix - Fix _waveWriter.dispose exception if recording not done(only visible in Windows Event logs)
- None
Go to Scan125Download page.
All documentation, including the User Manual is included in thisdownload.
PreviousRelease Details can be found here:
Next Release will have:
- Possibly - Anything else users ask me for
Thanks to Everyone
Just a 'top note' to say thanks to everyone using my program. With each release not only are new functions being added BUT MOSTIMPORTANTLY those bugs (silly or large) that people care to tell meabout are getting fixed. So if you see/experience a bug of anydescription then please let me know. Please Donate to mysupported charity which I would very much appreciate, as will they,and will keep me developing and supporting the programs.The Program is currently Freeware(see http://en.wikipedia.org/wiki/Freeware)with a Careware/Charity statusand objective (see http://en.wikipedia.org/wiki/Careware). It operates with no limitations. The author reserves the right tochange the program status and limitations on any future release. Existing releases will retain their status and your right to use thembut support may not be available.
The Uniden UBC125XLT is a European region orientated scanner. TheBC125AT is the equivalent US reqion orientated scanner. TheUBC126AT is the equivalent Australia/New Zealand region orientatedscanner. They are very similar but not identical. TheAlbrecht AE125H scanner is a licensed and branded clone of the UnidenUBC125XLT scanner for the European market..
This program supports the UBC125XLT, BC125AT, UBC126AT and AE125Hscanners. I must be point out that as I do not have the BC125AT,UBC126AT and AE125H scanners I have relied on people who have thesescanners being very helpful in testing and reporting issues. Ifyou find a problem/issue with any of the supported scanners then*please* let me know so I can try and resolve it.
Scan125 written in Visual Basic and .NET V4.5. The program iscurrently portable and will run from any 'user' directory it is placedin. It also currently makes no registry changes or any othersystem changes, no required network connections etc. so is benign innature and operation and protects your privacy. If a Windowssystem directory, like Program Files, is chosen then administratorrights will have to be assigned to the program. For securityreasons it is suggested/recommended that a User directory is chosen.
The program also makes no hidden calls home and will not automaticallycheck for program updates by default. There are however somefunctions that the user can manually invoke which will make a URLconnection to my Scan125 website. Also a program option can beset to allow it to check my websites for updates every 'n' days, as set by user.
The Program also requires the installation of the Uniden_Universal_Driver USB/serialdriver which is available for download on this site.
ForApple PC/MAC users using BOOTCAMP, PARALLELS or VMware to run Windowsthen from Version 1.8.0.0 of the Scan125 Control Program youshould be able to run Scan125 on your system. If not then pleaselet me know.
Screen Shots
Everybody wants to know how a program looks so here are three screenshots. If you view the manual then more will be revealed.For the Uniden UBC125XLT and Albrecht AE125H Scanners you will seethis: (for Model: AE125H you will see Model: AE125H on the form titleline)
For the Uniden BC125AT Scanner you will see this:
For the Uniden UBC126AT Scanner you will see this:
Functions And Features And History
The User Manualis the comprehensive place to see and understand this program.The History filedetails program development features and bug fixes.
The ReadMe filecovers some basic information relating the program.
To Download the currentversion of Scan125 please got to Scan125 Download page.
Please see the Program and DriverInstallation section of the UserManual for program download and installation instructions.
All documentation, including the User Manual is included in thisdownload.
User Manual
You can view the user manual here.The manual is included in the software download which can be found onthe Scan125Download page/directory.
Driver InstallationRequired
The Scan125 Control Program also requiresthe separate installation of the necessary Uniden Serial Driver.The required driver can be found on the Scan125 Download page inthe Uniden_Universal_Driverfolder.
Please see the Program and DriverInstallation section of the UserManual for driver download and installation instructions.The programs is written in .NET Visual Basic (V4.5) as a portableapplications that has no install program and does not make WindowsRegistry changes.. This means that basically it will only run ona Windows PC that has .NET V.35 installed. I've notresearched the Linux and Apple platforms to see if they can support.NET based applications. If they do and you can get this programto work on any other platform, e.g. Linux and under Wine then pleaselet me know and I will put the details here for others to see.
ForApple PC/MAC users using BOOTCAMP, PARALLELS or VMware to run Windowsthen from Version 1.8.0.0 of the Scan125 Control Program youshould be able to run Scan125 on your system. If not then pleaselet me know.At the bottom of this page, in the programs and in the User Manual youwill find my contact Email address.
- USA Band Plan - '1' + 'Power On'.
- Canada Band Plan - '2' + 'Power On'.
- Reset & Clear Memory - '2' + '9' + 'Hold' + 'Power On'.
- Reset & Clear Memory (same) - '8' + '9' + 'Hold' + 'Power On.'
- Load Test Data - '3' + '9' + 'Power On'. Overwrites channels with 144-146 VHF Amateur frequencies.
- Batt. Save Test - '1' + '7' + 'Power On'. Then 'Hold' to toggle.
- Batt. Charge Test - '2' + '7' + 'Power On. Then 'Hold' to toggle.
- Key Touch Test - '3' + '0' + 'Power On'.
- Display Contrast - '3' + 'Hold' + 'Power On'.
- Contrast & Key Test - '3' + 'Scan' + 'Power On'.
- Others? ...
Related Pages
- External Links
Reviews, etc
- This is a fantastic scanner for its class, similar in design and function to the BC72XLT, BC92XLT and BC95XLT series of scanners, with a vastly improved set of features and narrow-band support. This is your best buy for a non-digital, non-trunking scanner; Made in 2012. Owner for 1+ years.
- Critique: Incorrectly includes common U.S. Business Band itinerant frequencies in the FRS/GMRS/MURS service bank without mention in the manual. (Ch28: 'Red Dot' 151.6250 MHz, Ch29: 'Brown Dot' 464.5000 MHz, Ch30: 'Yellow Dot' 464.5500 MHz, Ch31: 'Silver Star' 467.8500 MHz, Ch32: 'Gold Star' 467.8750 MHz, Ch33: 'Red Star' 467.9000 MHz, Ch34: 'Blue Star' 467.9250 MHz)
- Critique: Adjusting squelch requires several button pushes and knob twists. Adjusting volume requires a button push and knob twist. Wish there were options to configure this. My only real complaint.
Supporting Software
- BC125AT SS (Uniden Programming Software) (freeware)
- Scan125 (Now supports UBC126AT) (freeware)
- ARC125 (costs $24.99)
Note: The BC125AT SS software saves a tab delimited file format that can be edited and managed in most text editors and spreadsheet software. Lines can be safely omitted or reordered.
Mailing Lists / forums
BC125AT Scanners for Sale
Retrieved from 'https://wiki.radioreference.com/index.php?title=BC125AT&oldid=279072'
| Scan125 Control Program |
|---|
| Home PageManualDownloadSend Your CommentsUsage ProfileUser CommentsDONATE |
|---|
Supported Scanners: Uniden UBC125XLT, BC125AT, UBC126AT andAlbrecht AE126H
The Scan125 Control Program is currently Freewarewith a Careware/Charity statusand objective. (http://en.wikipedia.org/wiki/Careware).
Please Donate to mysupported charity which I would very much appreciate, as will they,and will keep me developing and supporting the programs.The Scan125 Control Program Suiteconsists of two programs. Then main Scan125 Control Program and the Scan125Convert Utility Program.
The project started in November 2013 with the first public non betarelease in April 2014. Since then Scan125 has been regularlydeveloped and supported into the product you see today with many of thefeatures and functions being implemented in response to userrequests. Since it's inception and release it has supportedscanning real time control and virtual console/display function.
Up to 25 August 2018 Scan125 had achieved over 3500registered users in 57 countries. Since then and with V2.5.0.0 onwards thefree registration is no longer required. The number ofusers will no doubt continue to grow and is a very welcome endorsementof the program's growth and equally important the feedback andencouragement I have received from so many people. Thank you all!
It would be really great to be world famous and earn millions ofpounds from doing crappy software but it is not going to happen sountil I win the lottery I'll have to be poor and boring.
- Scan125Control Program - the original full control program for realtime controlling (with scanner display) and also the loading, savingand editing of data to/from the following scanners:
- Uniden UBC125XLT -(Nov.2013)
- Uniden BC125AT - (Nov.2013)
- Uniden UBC126AT - (Jun.2015)
- Albrecht AE125H - (Jul.2017)
- Support real time control, with virtual console and display, forALL the above listed Scanners.
- Support setting of many scanner controls with a single mousebutton click - e.g Close Call Settings
- Support virtual bank naming
- Support all these scanners in one package
- Support real time logging and auto saving of scan hits
- Support audio recording with automatic start/stop/pause and spiltfile recording
- Support for many other features not available in other software
- ALL FOR FREE andsupporting Charity if you choose to
- Scan125Convert Utility Program -for reading CSV data files and converting them to Scan125 ControlProgram format data files.
Uniden Bearcat Bc125at Driver For Mac Download
Scan125ConvertUtility Programis currently Freeware.
Both programs work individually of each other and each has their ownversion numbers and release cycles.
Please note that the Scan125 Control Program also requires the separate installation of thenecessary Uniden Serial Driver which is also available on THIS website in the Scan125 Downloadlocation.
ForApple PC/MAC users using BOOTCAMP, PARALLELS or VMware to run Windowsthen by using the latest version the Scan125 Control Program youshould be able to run Scan125 on your system. If not then pleaselet me know.
Note! I check all my software before uploading with MalwarebytesPro and Microsoft Windows Defender Antivirus. In addition I useVirusTotal.com to confirm as they have over 60 scanner engines. Despite these actions you may find that your AntiVirus/Securitysoftware may flag my software. This is because I use a sourceprotection obfuscator which confuses them. Please report to mevia Email any cases where you find any issue with downloading mysoftware. When I receive such reports I downloadmyself and revalidate. I then contact the anti virus softwarevendor with a false positive report. It can take them 48hours or longer to process and update their definitions. Meanwhile you can also use VirusTotal.com for yourself and decide ifyou want to create an exception in your software.
Current Release - V3.3.0.0 - 10 October 2020
The current release version, files and MD5 checksums are as detailed inthe table below:| Version | File | MD5 Checksum | Date |
| V3.3.0.0 | Scan125_V3300.zip | 0D15C23CF278ABFC9CB2B7787AE930C1 | 10 October 2020 |
| V3.3.0.0 | Scan125.exe | 85895C96D317FBC19F6F2C6BD5AD95D8 | 10 October 2020 |
NEW in V3.3.0.0
- Add - Add HTML Frequency Monitoring File (useful for audiostreaming information and website information)
- Add - Error message trap for when scanner returns more statusdata fields then expected (stops hard errors)
- None
- Fix - Notepad data not being written in release V3.2.0.0 only
- Fix - Fix _waveWriter.dispose exception if recording not done(only visible in Windows Event logs)
- None
Go to Scan125Download page.
All documentation, including the User Manual is included in thisdownload.
PreviousRelease Details can be found here:
Next Release will have:
- Possibly - Anything else users ask me for
Thanks to Everyone
Just a 'top note' to say thanks to everyone using my program. With each release not only are new functions being added BUT MOSTIMPORTANTLY those bugs (silly or large) that people care to tell meabout are getting fixed. So if you see/experience a bug of anydescription then please let me know. Please Donate to mysupported charity which I would very much appreciate, as will they,and will keep me developing and supporting the programs.The Program is currently Freeware(see http://en.wikipedia.org/wiki/Freeware)with a Careware/Charity statusand objective (see http://en.wikipedia.org/wiki/Careware). It operates with no limitations. The author reserves the right tochange the program status and limitations on any future release. Existing releases will retain their status and your right to use thembut support may not be available.
The Uniden UBC125XLT is a European region orientated scanner. TheBC125AT is the equivalent US reqion orientated scanner. TheUBC126AT is the equivalent Australia/New Zealand region orientatedscanner. They are very similar but not identical. TheAlbrecht AE125H scanner is a licensed and branded clone of the UnidenUBC125XLT scanner for the European market..
This program supports the UBC125XLT, BC125AT, UBC126AT and AE125Hscanners. I must be point out that as I do not have the BC125AT,UBC126AT and AE125H scanners I have relied on people who have thesescanners being very helpful in testing and reporting issues. Ifyou find a problem/issue with any of the supported scanners then*please* let me know so I can try and resolve it.
Scan125 written in Visual Basic and .NET V4.5. The program iscurrently portable and will run from any 'user' directory it is placedin. It also currently makes no registry changes or any othersystem changes, no required network connections etc. so is benign innature and operation and protects your privacy. If a Windowssystem directory, like Program Files, is chosen then administratorrights will have to be assigned to the program. For securityreasons it is suggested/recommended that a User directory is chosen.
The program also makes no hidden calls home and will not automaticallycheck for program updates by default. There are however somefunctions that the user can manually invoke which will make a URLconnection to my Scan125 website. Also a program option can beset to allow it to check my websites for updates every 'n' days, as set by user.
The Program also requires the installation of the Uniden_Universal_Driver USB/serialdriver which is available for download on this site.
ForApple PC/MAC users using BOOTCAMP, PARALLELS or VMware to run Windowsthen from Version 1.8.0.0 of the Scan125 Control Program youshould be able to run Scan125 on your system. If not then pleaselet me know.
Screen Shots
Everybody wants to know how a program looks so here are three screenshots. If you view the manual then more will be revealed.For the Uniden UBC125XLT and Albrecht AE125H Scanners you will seethis: (for Model: AE125H you will see Model: AE125H on the form titleline)
For the Uniden BC125AT Scanner you will see this:
For the Uniden UBC126AT Scanner you will see this:
Functions And Features And History
The User Manualis the comprehensive place to see and understand this program.The History filedetails program development features and bug fixes.
The ReadMe filecovers some basic information relating the program.
To Download the currentversion of Scan125 please got to Scan125 Download page.
Please see the Program and DriverInstallation section of the UserManual for program download and installation instructions.
All documentation, including the User Manual is included in thisdownload.
User Manual
You can view the user manual here.The manual is included in the software download which can be found onthe Scan125Download page/directory.
Driver InstallationRequired
The Scan125 Control Program also requiresthe separate installation of the necessary Uniden Serial Driver.The required driver can be found on the Scan125 Download page inthe Uniden_Universal_Driverfolder.
Please see the Program and DriverInstallation section of the UserManual for driver download and installation instructions.The programs is written in .NET Visual Basic (V4.5) as a portableapplications that has no install program and does not make WindowsRegistry changes.. This means that basically it will only run ona Windows PC that has .NET V.35 installed. I've notresearched the Linux and Apple platforms to see if they can support.NET based applications. If they do and you can get this programto work on any other platform, e.g. Linux and under Wine then pleaselet me know and I will put the details here for others to see.
ForApple PC/MAC users using BOOTCAMP, PARALLELS or VMware to run Windowsthen from Version 1.8.0.0 of the Scan125 Control Program youshould be able to run Scan125 on your system. If not then pleaselet me know.At the bottom of this page, in the programs and in the User Manual youwill find my contact Email address.
I will do my best to fix any bugs that you hopefully do not find. If you are reporting a bug then please give me as much information asyou can. Operating system (e.g. Windows XP/Vista/7/10), sequenceof events or actions that you went through, and anything else that mayassist me.
I cannot guarantee to fix all bugs, nor agree a time frame for anyfixes. Having said this, as previously stated I will do mybest. I do guarantee that I will acknowledge your bug report assoon as I can, providing I can contact you via a valid Emailaddress.
If you do not wish to be contacted then say so in your bugreport. I will then just note the problem and delete your Emailand associated address at my end. See my Privacy Policy.Just below and at the bottom of this page, in the program and in theUser Manual you will find my contact Email address.
Uniden Bearcat Bc125at Driver For Mac Drivers
I welcome any Function Requests and/or Suggestions. I cannotguarantee to implement them, nor a time frame if I decide to. Ifyou are contacting me to suggest function or make suggestions then itwill be to both our benefits if I can respond to you via Email.If you donot wish to be contacted then say so in your Email. I will thenjust note the request/suggestion and delete your Email and associatedaddress at my end.
Uniden Bearcat Bc125at Driver For Mac Windows 7
See my Privacy Policy.If you want or need to contact me about this program then please Email:| scan125 | @ | nick-bailey | . | co | . | uk |
Uniden Bearcat Bc125at Driver For Mac Windows 10
Top Of Page| Home PageSite IndexAbout MePrivacyContact UsMarmottaPhotoArt |
|---|
